| • |
26-inch hitch height on ALL TRUCKS |
| • |
Street Legal with license and insurance |
| • |
Under hood inspection |
| • |
DOT-approved tires. 35-inch tall max. no cut tires |
| • |
Pull from bumper, reese, or drawbar type hitch rigid to the frame, originate from behind rear axle, hooking point must be no less than 42 inches from the center of the axle with no supports attached to the rear axle. |
| • |
540-cubic inch limit size of block with after market cast block OK. OEM stock 1 ton or less drive train from center of front axle. Other weights in bed only. |
| • |
May run front weights with no weights, brackets or bumper to extend more than 60 inches from center of front axle. |
| • |
Safety chains or loops around drive shafts |
| • |
Pump fuel only - no alcohol, nitrous or methane-based fuels allowed, no water injection |
| • |
Aluminum intake and headers allowed. No side exhaust in front or rear wheels |
| • |
NO exhaust should exit out the hood. |
| • |
No aluminum heads - cast iron ONLY |
| • |
No sanctioned pulling trucks |
| • |
Scatter blankets high recommended |
| • |
All trucks must have driveshaft shield under rear U joint. It must be 4" from center of U joint both ways, made from 1/8" thick steel and can be bolted together by 3/8" bolts. Shield can be maximum 4" larger than the diameter of the driveshaft |
